HOME PROFILE PRODUCTS  CLIENTS CONTACT US ENQUIRY SITEMAP PHOTO GALLERY

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
Bacteriological Incubator
Blood Bank Refrigerator
BOD Incubator
Clean Room Equipment
CO2 Incubator
Deep Freezer
Digital Moisture Meter
Environmental chamber
Fume Chamber
Humidity Oven
Laboratory Autoclave
Laboratory Oven
Laminar Flow Bench
Muffle Furnace 
Orbital Shaker Incubator
Rotary Shaker
Stability Chamber
Temperature Bath
UV Inspection Cabinet 
Vertical Dehumidifier
Viscometer Water Bath
Vacuum Oven
Walk In Chamber
 
   
 

Laboratory Oven - Manufacturers And Suppliers

   
 
   
   
Laboratory Oven - Manufacturers And Suppliers Laboratory Oven - Manufacturers And Suppliers
   
 
Purpose : Designed, fabricated to suit various applications in Laboratory
Construction : Double walled, outer body of S. Steel (304 Gr) and Inner Prime SS 316 grade Door - Metallic double walled dully insulated door fitted with standard set of hardware. Having provision for adjustable mesh / perforated trays.
Insulation : Gap of inner & outer walled filled with sufficiently thick thermal insulation.
Heating : The heating elements are designed for low wattage density to works on blackheat, are in coil form supported with refractory or long lasting S.S. tubular heater are mounted at bottom to give uniform heating.
Air Circulation : Motorized blower for maintaining uniform temp. within chamber, blowing in Air from bottom, no recalculation of air.
Temp. Control : Microprocessor based Controller cum Indicator with pT 100 sensor.
Tamp. Range : 50°C to 200°C (Higher Version on Spl. Request)
Accuracy : ± 1° C or better.
 
   
       
   
 
Inner Size (Inch) watt Wire
Tray
Cap.
/ Ltrs
Perforated
Tray
200°C Higher Temp.
300°C
          Std. GMP Std. cGMP
(a)12 x 12 x12 750 1 27         P.O.R.
(b)14x 14 x 14 1000 2 40         P.O.R.
(c)18x 18 x 18 1500 2 90         P.O.R.
(d)18x 18 x 24 1750 2 120         P.O.R.
(h)24x 24 x 24 2000 3 220         P.O.R.
(i) 24x 24 x 36 2500 3 325         P.O.R.
   
   
 
   
 
* OPTIONAL: -
a) Safety Blind Controller P.O.R.
b) P.I.D. Controller with Printer Interface P.O.R.
c) P.I.D. Controller with PC Interface. P.O.R.
d) PROTOCOL DOCUMENTS P.O.R.
e) Oven with Horizontal Flow & / or top motor P.O.R.
f) Precision Oven / Memmert Oven with all sides heaters P.O.R.
   
   
Home - Profile - Products - Clients - Contact Us - Enquiry - Sitemap Designed & Hosted by : MID   Promoted by : GID
Our Clients    

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
Visit Also :
www.hmgind.com
www.stabilitytestchamber.net
www.laboratoryequipmentindia.com
www.stabilitychamber.net
www.clean-roomequipment.com
www.environmentaltestchamber.co.in
www.hmgindia.net
   
Factory Address : 
HMG HOUSE, Plot No. 33-A,Phase-IV, Parmar Techno Centre, Near Vasai Phata, Western Express Highway No.8, Vasai (East) Dist. Thane-401208, Maharashtra, India.
Phone No - 91-250-3212747
Correspondence Address :
 F - 201, Country Park, Opp. Tata Steel Ltd., Dattapada Road, Borivli (East), Mumbai - 400 066, Maharashtra, India.
Mobile : 0 9867339190 / 0